Aiphone JF Video Door Stations
There are three video door stations available for use with the Aiphone JF series JF1MD and JF2MED video intercom systems.
- Aiphone JFDA which is a surface mount plastic door station
- Aiphone JFDV which is a diecast steel vandal resistant surface mount door station
- Aiphone JFDVF which is a stainless steel vandal resistant flush mount door station
The JFDVF door station is supplied with a flush mount back box.
All models are weather resistant, are designed for outdoor use and are covered by a two year warranty.
30 degree angle boxes are available for the JFDV and JFDA colour video door stations. The JFWD for use with the JFDV and the KAWD for use with the JFDA door station. These angle boxes are particular useful when a door station is installed on an entrance with double doors or glass panelling on either side of the door. The angle box enables the door station to be angled towards the door giving a better view of the area in front of the door. Both boxes are constructed of plastic.
Please contact us prior to installing any cabling to ensure the correct type of wiring is being installed. Use of the incorrect cabling can affect the performance of the system.
Downloads
JF Door Stations Installation Manual
Aiphone KAWD Installation Manual
Note the JF model door stations are not compatible with the JA or JK series monitors.
Please see the accessories page to find accessories for this model.
JFDA JFDV JFDVF
| Dimensions | |||
| Model | Height | Width | Depth |
| JFDA | 131mm | 99mm | 40mm |
| JFDV | 173mm | 98mm | 25mm |
| JFDVF | 209mm | 135mm | See below |
| Flush mount door station hole cut out dimensions | |||
| Model | Height | Width | Depth |
| JFDVF | 180mm | 110mm | 45mm |