Aiphone APM High Power Intercom
The Aiphone APM high power intercom system is designed for applications that require an intercom that can be used in very noisy environments. The APM range has a very high power output level of 10 watts.
Two master stations can be installed in a system when AP5M and AP10M masters are used.
Examples; Truck weigh bridges, Vehicle workshops, etc.
There are three models available in the APM high power intercom range.
- Aiphone AP1M single call high power master station.
- Aiphone AP5M five call high power master station.
- Aiphone AP10M ten call high power master station.
The APM high power intercom master station would ideally be connected to 8 ohm horn speakers to take the advantage of the APM systems high power level. Though the APM masters can also be connected to AS3A indoor sub stations, AS3N ceiling sub stations and also the LESS vandal proof flush mount door station.
The Aiphone APM master stations are mains powered and do not require the installation of a DC power supply. The images below are of the overseas model, the Australian model is fitted with an Australian approved three pin mains plug and lead.
NOTE the APM system requires the installation of shielded cabling. Failure to install shielded cabling will affect the operation of this system. Please contact us prior to installing any cabling to ensure the correct type of wiring is being installed.
Downloads
Aiphone APM Installation Manual
Aiphone AS3N Installation Manual
Aiphone LESS Installation Manual
Aiphone SBX2G Installation Manual
AP10M Ten Call Master Station
AP1M 1 Call Master Station
| Dimensions | |||
| Model | Height | Width | Depth |
| AP10M | 140mm | 276mm | 253mm |
| AP5M | 140mm | 276mm | 253mm |
| AP1M | 140mm | 196mm | 240mm |